Can I do a cold pull with PLA?

Can I do a cold pull with PLA?

The cold pull should be made if your nozzle is only partially clogged, and some filament is still being extruded. Our testing has found that PLA works best for a cold pull, as other filaments do not retain the tip as PLA does and they will either tear or melt too much.

What is nylon filament good for?

Nylon filament is an incredibly strong, durable and versatile 3D printing material. Flexible when thin, but with very high inter-layer adhesion, nylon lends itself well to things like living hinges and other functional parts.

Can you 3D print with nylon?

When it comes to 3D printing materials, Nylon has to be mentioned as one of the most popular materials for professional users. Nylon can be 3D printed using three different technologies, namely FDM, Selective Laser Sintering (SLS), and MultiJet Fusion (MJF).

Is Nylon safe to print?

Nylon is a tough and semi-flexible material that offers high impact and abrasion resistance. It is an ideal choice for printing durable parts.

Is nylon safe to print?

Which is the best cold pull filament to use?

Our testing has found that PLA works best for a cold pull, as other filaments do not retain the tip as PLA does and they will either tear or melt too much. However, there are filaments specifically made for cleaning hotends. Go to the LCD Menu -> Settings -> Temperature -> Nozzle and set the temperature to 270 °C.

When to do a cold pull on PLA?

The cold pull should be made if your nozzle is only partially clogged, and some filament is still being extruded. If the nozzle is completely clogged, please check the Clogged nozzle guide. Our testing has found that PLA works best for a cold pull, as other filaments do not retain the tip as PLA does and they will either tear or melt too much.

What should the temperature be for nylon filament?

Make sure you check this with your printer or hot end manufacture first. However generally speaking if your unmodified hot end will go up to 260C+ then it should be using suitable high-temp tubing – it’s wise to not assume though. Nylon filament temperature wants to be around 240C-260C and up.

Which is the best filament to clean hotends?

If the nozzle is completely clogged, please check the Clogged nozzle guide. Our testing has found that PLA works best for a cold pull, as other filaments do not retain the tip as PLA does and they will either tear or melt too much. However, there are filaments specifically made for cleaning hotends.