Can you use acetone to smooth 3D prints?

Can you use acetone to smooth 3D prints?

Acetone is a great tool for everything between cleaning your hot end to welding together two 3D printed parts.

Does acetone smoothing make ABS stronger?

It’s false, however, to assume that acetone-treated parts are all-around stronger. A study by Michael Graham confirms the findings of the previous study – that acetone-treated parts are vertically stronger – but presents new evidence regarding their horizontal strength.

Does acetone smoothing work on PLA?

Acetone is used by some to finish ABS prints into a smooth, glossy surface. It’s a semi-dangerous activity, as Acetone is flammable and toxic, but many take the right precautions and get the job done. But it doesn’t work with PLA.

How long does acetone smooth ABS last?

Set a timer for about 15 minutes and wait. As time passes, you’ll begin to see the part getting a little bit shinier. After the 15-minute mark, just remove the container and let the finished part rest.

Does vapor smoothing ABS make it stronger?

The following photograph show the same system after the ABS Vapour smoothing process. Not only do the finished parts look better, they now have a higher resistance to water ingress, and they can often be stronger than their non-polished earlier selves once fully-hardened.

What will acetone do to PLA?

Acetone is widely used and a product that almost everyone has at home. It is often used when dissolving PLA, but has the disadvantage that the PLA surface becomes softer and somewhat stickier. Therefore, caution is required so that your 3D printed object is not destroyed when using acetone.

Can you use acetone to smooth a 3D print?

The ability to perfect 3D prints using smoothing and finishing methods is one of the things that separates 3D printing professionals from amateurs. Smoothing ABS prints using an acetone vapor bath is one of the easiest ways to start – it doesn’t require a lot of skill, hardly needs any manual work, and has a lot of room for error.

Can you use acetone to smooth ABS parts?

Using an acetone vapor bath to treat ABS 3D-printed parts is an extremely effective (and only moderately dangerous) way to create parts with a shiny, smooth finish. Applying acetone with a brush, or submerging a model in a liquid acetone bath, generally results in a part that has had its detail completely melted away.

Can you use acetone vapor bath on 3D printed ABS?

Virgie can! Treating 3D-printed ABS parts with a acetone vapor bath is a great way to create a smooth finish. Proper care needs to be exercised when using boiling acetone vapor, as it is a dangerous chemical. If you decide to do this yourself, take lots of pictures, and let me know what you find out!

How long does it take to remove acetone from ABS prints?

At this point, the surface of the ABS print is still soft as it still has some acetone on it. The smoothing process will continue until all the acetone on the surface of the print has dried away. The whole process of removal of acetone can take from several hours to a few days to complete.