How do I get resin off my screen?

How do I get resin off my screen?

Wet Cleaning: Please apply a small amount of 95% sanitizing alcohol on the printer’s LCD screen to remove any cured resin, smudges, and/or fingerprints present on the LCD screen. Use a paper towel or a fiber cloth and wipe in one direction to thoroughly clean the surface of the LCD screen.

How do you keep resin from sticking to FEP?

To stop your resin 3D prints sticking to the FEP, you should make sure you have enough bottom layers and bottom layer curing time, so it has enough time to harden. Use PTFE spray on your FEP film, let it dry, and this should create a lubricant to stop the resin from sticking to the resin tank.

How to stop 3D prints from sticking to FEP?

To stop your resin 3D prints sticking to the FEP, you should make sure you have enough bottom layers and bottom layer curing time, so it has enough time to harden. Use PTFE spray on your FEP film, let it dry, and this should create a lubricant to stop the resin from sticking to the resin tank.

What can I use to stop resin from sticking to FEP film?

Just a few sprays to cover the FEP film, so it can dry and work as a lubricant to stop resin sticking there. A good PTFE spray you can get to prevent resin prints sticking to the FEP film is the CRC Dry PTFE Lubricating Spray from Amazon.

What should I do if my resin is sticking to my printer?

Once most of the resin is filtered back into the bottle, you want to use your fingers through your gloves, to lightly push the bottom of the FEP where your print is. Pressing around the edges of where the print is sticking down is the best practice.

What to do if resin keeps sticking to LCD screen?

You should unscrew your build plate and turn it at a downwards angle so that all the uncured resin drops off the build plate and back into the resin vat. Once you have most of it off, you can give it a quick wipe with a paper towel, so you know it won’t drip on the LCD screen.