Is TEVO tarantula good?

Is TEVO tarantula good?

The Tevo Tarantula Pro did satisfactory with most tests, with middle-of-the-road scores for dimensional accuracy, spike test, and resonance. Its strongest performance came in the bridging test, with a solid 5 out of 5 points. We found some problems with fine flow control, negative features, and overhangs.

How do you change the filament on a TEVO tarantula?

To change the filament the nozzle must be heated. Use the menu option “Control -> temperature -> nozzle”. Set the temperature to “220C” or a value appropriate for your plastic type.

How do you load a Treo tarantula filament?

To make loading filament easier, it’s recommended you take a pair of side-cutters and cut the filament at an angle. Feed it up until it’s in your hot end. ​Keep in mind the controller will not allow you to feed filament with the extruder until the hotend is heated up to at least 150 celcius.

How do you swap filaments?

Removal of current filament

  1. Step 1: Preheat your hot end based on the temperature guidelines of your current filament.
  2. Step 2: Wait until the hot end heats up to the required temperature.
  3. Step 3: Manually extrude a small portion of the filament.
  4. Step 4: Push down the coupling to release the filament from the hot end.

What’s the latest firmware for TEVO trantula 3D printer?

Marlin Firmware 1.1.9 for Stock Tevo Trantula 3D printer. You can also checkout my 3D prints completed using my Tevo tarantual after Marlin 1.1.9 firmware update here.

Where can I find tevo 3D printer drivers?

You find on this page all links to your actual firmware & driver for your TEVO 3d printer model. Take care when update your 3d printer to follow each step of the tutorials for your 3d printer!

How to configure tevo i3 Marlin firmware?

// build by the user have been successfully uploaded into firmware. # define STRING_CONFIG_H_AUTHOR “(none, default config)” // Who made the changes. // SERIAL_PORT selects which serial port should be used for communication with the host. // This allows the connection of wireless adapters (for instance) to non-default port pins.