What is HC-06 Bluetooth module?

What is HC-06 Bluetooth module?

The HC-06 bluetooth module is a slave bluetooth module designed for wireless serial communication. It is a slave module meaning that it can receive serial data when serial data is sent out from a master bluetooth device(device able to send serial data through the air: smart phones, PC).

How does Bluetooth module HC-06 work?

The HC-06 is a class 2 slave Bluetooth module designed for transparent wireless serial communication. Once it is paired to a master Bluetooth device such as PC, smart phones and tablet, its operation becomes transparent to the user. All data received through the serial input is immediately transmitted over the air.

How do I test my HC-06 Bluetooth module?

Module HC-06 configuration To test serial communication, enter AT in the serial monitor and click on the send or press enter. Be sure to select “No end line” and the correct baudrate in the communication options. Module should answer OK. If it is not working check the wiring and the module version.

What is the use of HC-05 Bluetooth module?

HC-05 Bluetooth Module is an easy to use Bluetooth SPP (Serial Port Protocol) module, designed for transparent wireless serial connection setup. Its communication is via serial communication which makes an easy way to interface with controller or PC.

Can HC-06 send data?

HC-06 works on serial communication. The Android app is designed to send serial data to the Arduino Bluetooth module when a button is pressed on the app. You can open the serial monitor and watch the received data while connecting.

How many pins of the HC-05 Bluetooth module can remain unconnected?

HC05 PIN DESCRIPTION The HC-05 Bluetooth Module has 6 pins commonly used.

What are the features of the hc-06 Bluetooth module?

These are some features of HC-06. Bluetooth protocol which we connect with it is Bluetooth 2.0+ EDR. 2.0+ EDR is a standard Bluetooth protocol which is used. It is at the Bluetooth class 2 power level. USB protocol used for it is USB v 1.1/2.0. The frequency on which it operates is a 2.4 GHz ISM frequency band.

What do you need to know about hc-06?

So let’s start with basic Introduction to HC-06: HC-06 is a Bluetooth module which is designed to work on serial communication. When we paired it with Bluetooth working devices such as smarts phones and tablet, its use becomes easier for device users.

How does the hc-05 module work on Arduino?

The HC-05 module includes the Radio and Memory chips, 26 MHz crystal, antenna and RF matching network. The right section of the BT Board has connection pins for power and signals as well as a 5V to 3.3V Regulator, LED, and level shifting. KEY: If brought HIGH before power is applied, forces AT Command Setup Mode. LED blinks slowly (2 seconds)

What are the parts of a Bluetooth module?

(Available HERE) Sections of the BT Board (Above): The HC-05 module includes the Radio and Memory chips, 26 MHz crystal, antenna and RF matching network. The right section of the BT Board has connection pins for power and signals as well as a 5V to 3.3V Regulator, LED, and level shifting.