Why are there different size nozzles?

Why are there different size nozzles?

Basically the smaller the nozzle size, the higher you increase your chances of 3d printer problems. Especially if you’re using cheap filament – it might work fine with lower detail, thick nozzles, but if you want specialist prints with small nozzles, it’s key to using pure, high quality filaments.

What should line width be?

A general rule of thumb accepted by 3D printer users suggest a line width up to 50% bigger than the nozzle. Although this generally works fine in most cases, you’ll see a big drop in print quality and consistency with bigger nozzles and layer height.

Why do slicers have nozzle size settings in Cura?

Other than the warnings, nozzle sizes may be a holdover from a past version when they were more useful, or simply may have just seemed like a reasonable feature to put in at the time and no one really thought about it. As far as changing nozzle size goes, I go to Preferences > Configure Cura > Printers > Machine Settings > Extruder 1 > Nozzle Size.

What kind of settings do you need for a slicer?

Slicer settings do impact the quality of your print so it’s important to have the right software and settings to get you the best quality print possible. For the examples, we will use Cura (version 15.04.3), a free slicer with similar features to most other slicers. 8 Slicer Settings You Need to Know & How They Work! 1. Layer Height

How to change nozzle size and store it?

CURA SLICER | HOW TO CHANGE NOZZLE SIZE and STORE IT! If playback doesn’t begin shortly, try restarting your device. My name is Roy Berntsen. I am a passionate 3D design specialist with a big interest in 3d printing! – I love prototyping by 3D printing I am the Designer of the V-King CoreXY 3d Printer – https://www.thingiverse.com/thing:2921021

Why are slicer nozzles so thin on a 3D printer?

Because of the additional precision, your slicer can use the minimum filament necessary between your model and the supports, so they’ll break away more easily – and have less broken contact area that needs sanding. Once last point, that really is the elephant in the room is the ease with which very thin nozzles are clogged.